 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 1 MBd Digital Transistor Output Optocoupler Product Selection Device Part No. 300 mil DIP Package SO8 400 mil DIP SO 5 I mA Prop Delay tPHL tPLH s (max) CTR Min % Max % CMR-V/s @ (Vcm) 1000 10000 15000 (10 V) (1.5 kV) (1.5 kV) 630 V VDE 0884 Peak Voltage 890 V Insulation UL = 1 min. Note 1414 V 2500 V 5000 V Single 1 8 V CC Anode 2 Cathode 3 4 7V B 6 VO 5 GND Dual Anode1 1 Cathode1 2 Cathode2 3 Anode2 4 8 7 6 5 VCC V01 V02 GND 6N135 HCPL-0500 HCNW135 6N136 HCPL-0501 HCNW136 HCPL-4502 HCPL-M452 HCPL-0452 HCNW4502 HCPL-4503 HCPL-0453 HCNW4503 HCPL-M453 HCPL-M454 HCPL-M456 HCPL-4504 HCPL-0454 HCPL-J454 HCNW4504 HCPL-4506 HCPL-0466 HCPL-J456 HCNW4506 HCPL-2530 HCPL-0530 HCPL-2531 HCPL-0531 HCPL-4534 HCPL-0534 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 16 16 16 16 16 16 16 16 16 16 16 16 16 16 12 10 12 12 12 12 10 10 10 10 16 16 16 16 16 16 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.4 1.0 1.0 0.5 0.5 0.4 0.4 0.4 0.4 2.0 2.0 1.0 1.0 1.0 1.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.4 0.55 1.14 1.14 0.7 0.7 0.55 0.55 0.55 0.5 2.0 2.0 1.0 1.0 1.0 1.0 7 7 7 19 19 19 19 19 19 19 19 19 19 19 26 44 26 26 21 25 44 44 44 44 7 7 19 19 19 19 50 50 150 50 50 150 50 50 50 150 50 50 150 50 65 >90 65 65 65 65 >90 >90 >90 >90 50 50 50 50 50 50 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *A * * * * * * * B * B * B 1 3 1 1 1,2 1 1 3 3 1,2 1 1 3 * B * B * B * B B B Shaded Text-RECOMMENDED FOR NEW DESIGNS NOTES: 1. PIN 7 not connected. 2. 630 V peak VDE 0884 with option 060. 3. No built-in pull resistor. A. 3750 Vrms / 1 min B. Option 020 The circuit shows how a 0 to 5 V logic signal can be level shifted to a -15 to 0 V signal. This circuit can safely be used for level shifting up to 800 V. The circuit uses an open collector output logic gate, the 74LS405, to drive the LED of the HCPL-4502/3 optocoupler. The HCPL-4502/3 also has an open-collector output. The designer chooses RIN to agree with the equation shown in the schematic. This equation sets the value of the optocoupler LED forward current. The output of the HCPL-4502/3 requires a pull-up resistor, RL. The current-transfer ratio (CTR) of the optocoupler determines the maximum amount of current the optocoupler output can sink while maintaining the output voltage (between pins 5 and 6) of 0.5 V or less. The benefits of the application is that it reduces transient immunity problem and is a convenient way of replacing pulse transformer for high-voltage level shifting. Typical applications include: * High Speed Logic Ground Isolation * Replace slow Phototransistor Isolators * Replace Pulse Transformers * Line Receivers * Analog Signal Ground Isolation Typical Level Shifting/TTL Interface Block Diagram +5 V HCPL-4502/3 R IN IF V IN 74LS05 1 8 2 7 IO RL I IL V OUT V OL IO (min) = I F * CTR (min) R L (min) = 15 - VOL O I(min) + I IL 3 6 4 R IN = 5 - V F IF 5 -15 V NOTE: FOR BEST CMR PERFORMANCE, CONNECT PIN 7 TO PIN 8. 300 mil 8-pin DIP 9.65 0.25 (0.380 0.010) TYPE NUMBER 8 7 6 XXXXZ YYWW 1 1.19 (0.047) MAX. 2 3 RU 4 UL RECOGNITION 1 2 3 4 7.62 0.25 (0.300 0.010) 5 6.35 0.25 (0.250 0.010) 8 9.65 0.25 (0.380 0.010) 7 6 5 PAD LOCATION (FOR REFERENCE ONLY) 1.016 (0.040) 1.194 (0.047) OPTION CODE* DATE CODE 6.350 0.25 (0.250 0.010) 4.826 TYP. (0.190) 9.398 (0.370) 9.906 (0.390) 1.78 (0.070) MAX. + 0.076 0.254 - 0.051 + 0.003) (0.010 - 0.002) 1.780 (0.070) MAX. 1.194 (0.047) 1.778 (0.070) 9.65 0.25 (0.380 0.010) 4.19 MAX. (0.165) 7.62 0.25 (0.300 0.010) 0.381 (0.015) 0.635 (0.025) 5 TYP. 1.19 (0.047) MAX. 4.70 (0.185) MAX. 0.51 (0.020) MIN. 2.92 (0.115) MIN. 1.080 0.320 (0.043 0.013) + 0.076 0.254 - 0.051 + 0.003) (0.010 - 0.002) 1.080 0.320 (0.043 0.013) 0.65 (0.025) MAX. 2.54 0.25 (0.100 0.010) DIMENSIONS IN MILLIMETERS AND (INCHES). * MARKING CODE LETTER FOR OPTION NUMBERS. "L" = OPTION 020 "V" = OPTION 060 OPTION NUMBERS 300 AND 500 NOT MARKED. 2.54 (0.100) BSC DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES). 0.635 0.25 (0.025 0.010) 0.635 0.130 (0.025 0.005) 12 NOM. SO-8 SMD * 5.080 0.127 (0.200 0.005) 5.994 0.203 (0.236 0.008) TYPE NUMBER (LAST 3 DIGITS) DATE CODE PIN ONE 0.406 0.076 (0.016 0.003) 1 2 3 4 7 8 7 6 5 45 X 0.432 (0.017) 3.937 0.127 (0.155 0.005) XXX YWW 3.175 0.127 (0.125 0.005) 1.524 (0.060) 0 ~ 7 0.228 0.025 (0.009 0.001) 1.270 BSG (0.050) *TOTAL PACKAGE LENGTH (INCLUSIVE OF MOLD FLASH) 5.207 0.254 (0.205 0.010) DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES) MAX. 0.203 0.102 (0.008 0.004) 0.305 MIN. (0.012) 400 mil 8-pin DIP 11.15 0.15 (0.442 0.006) 8 7 6 5 11.00 MAX. (0.433) 9.00 0.15 (0.354 0.006) 8 11.15 0.15 (0.442 0.006) 7 6 5 PAD LOCATION (FOR REFERENCE ONLY) TYPE NUMBER HCNWXXXX YYWW DATE CODE 6.15 (0.242) TYP. 9.00 0.15 (0.354 0.006) 12.30 0.30 (0.484 0.012) 1 2 3 4 1 2 3 4 1.55 (0.061) MAX. 10.16 (0.400) TYP. 7 TYP. 5.10 MAX. (0.201) + 0.076 0.254 - 0.0051 + 0.003) (0.010 - 0.002) 1.55 (0.061) MAX. 1.3 (0.051) 12.30 0.30 (0.484 0.012) 11.00 MAX. (0.433) 0.9 (0.035) 4.00 MAX. (0.158) 3.10 (0.122) 3.90 (0.154) 2.54 (0.100) TYP. 1.78 0.15 (0.070 0.006) 0.40 (0.016) 0.56 (0.022) 0.51 (0.021) MIN. 1.78 0.15 (0.070 0.006) 2.54 (0.100) BSC 0.75 0.25 (0.030 0.010) 1.00 0.15 (0.039 0.006) + 0.076 0.254 - 0.0051 + 0.003) (0.010 - 0.002) 7 NOM. DIMENSIONS IN MILLIMETERS (INCHES). DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES). SO-5 PAD LOCATION (FOR REFERENCE ONLY) 3.6 0.1 (0.142 0.004) 2.5 0.1 (0.098 0.004) 0.102 0.102 (0.004 0.004) 4.4 (0.17) 0.3 (0.01) 4.4 0.1 (0.173 0.004) MXXX XXX 7.0 0.2 (0.276 0.008) ANODE 1 6 5 V CC V OUT GND 0.15 0.025 (0.006 0.001) 2.5 (0.10) 1.3 (0.05) CATHODE 3 4 1.27 BSG (0.050) 0.71 MIN. (0.028) 0.4 0.05 (0.016 0.002) DIMENSIONS IN MILLIMETERS (INCHES) 0.9 (0.04) 7.2 (0.28) DIMENSIONS IN MILLIMETERS (INCHES) 0.5 (0.02) Options Available #020 - UL 5000 V rms/1 Minute Option #060 - VDE 0884 Approved Part Option #300 - Gull Wing Surface Mount Option #500 - Tape & Reel Packaging Option Remarks: The notation `#' is used for existing products, while (new) products launched since 15th July 01 will use `-'. www.agilent.com www.semiconductor.agilent.com For product information and a complete list of Agilent contacts and distributors, please go to our web site. www.agilent.com/semiconductors E-mail: SemiconductorSupport@agilent.com Data subject to change. Copyright (c) 2001 Agilent Technologies, Inc. November 9, 2001 5988-4589EN |
Price & Availability of HCPL-0531
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |